FREE SHIPPING ON ORDERS $500+

Haltech Direct Plug-in ECUs

Haltech Direct Plug-in ECUs

Vendor
Haltech
Regular price
$1,187.00
Sale price
$1,187.00
Quantity must be 1 or more

If you are after a simple plug-and-play option and your car still has its original engine and wiring in it, a Plug-in ECU is the easiest and quickest solution. You simply unplug the factory ECU, and plug the Haltech ECU directly into the factory harness. Load your base map and you're ready to go!
Platinum Sport Plug-in GM
Part Number: HT-051100
SUITS: Australia: Holden Commodore VN-VP (manual and auto trans) VR-VS (DELCO ECU, manual trans only). USA/Canada: early GM TBI/TPI with DELCO ECU. Camaro, Firebird, Corvette 86-89 (V8 TBI & TPI) Chev truck/van, S10 (TBI & TPI)
INCLUDES: Platinum Sport GM ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.
NOTES: Requires a CAN IO 12 Expander Box to accept an input from a flex fuel sensor.
OVERVIEW
  • Direct plug and play replacement of the OEM ECU, no rewiring necessary
  • Uses the car's factory sensors
  • Windows 2000, XP, Vista, Windows 7 & 10 compatible software
  • Real-time programming, instant hesitation free adjustment while the engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband “auto-tuning” using user definable target AFR table
  • USB and CAN Communication Port
FEATURES

FACTORY OUTPUTS:
  • Fuel Injectors
  • EST Output
  • Fuel Pump
  • AC Clutch Relay
  • Idle Control Torque Converter
  • Clutch
  • Thermo Fan
  • Check Engine Light
FACTORY OUTPUTS:
  • MAP sensor
  • Throttle Position Sensor
  • Air Temperature sensor
  • Oxygen sensor
  • Coolant Temperature sensor
  • Vehicle Speed Sensor
  • 4th Gear / Transmission over-temp
  • A/C Request Park / Neutral Switch
FUNCTIONS:
  • Closed Loop O2
  • Control Dual Tables
  • Engine Protection
  • Anti-Lag
  • Launch Control
  • Rally Anti-Lag
  • Decel Cut
  • Over Boost
  • Rev Limiter
  • Closed & Open Loop Boost Control
  • Gear Setup
  • Transient Throttle Enhance
Platinum PRO Plug-in ECU Nissan R32/33 Skyline
Part Number: HT-055101
SUITS: Nissan R32/33 GTS-T and GTR. Manual transmission only.
INCLUDES: Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.
NOTES: Directly accepts an input from a flex fuel sensor.
OVERVIEW
  • Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
  • Uses the cars factory sensors
  • Supports R32 GT-R twin MAF sensors
  • Supports Sequential Injection (peak and hold) and Direct fire ignition
  • Windows 2000, XP, Vista, Windows 7 compatible software
  • Real time programming, instant hesitation free adjustment while engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
  • OBD II Code Storing & Malfunction Indicator Light (MIL) Control (through laptop only )
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband “auto tuning” using user definable target AFR table
  • Flex Fuel Support
  • USB and CAN Communication Port
FEATURES
SUPPORTED OEM FUNCTIONALITY:
  • Boost Control
  • A/C Output
  • Idle Control
  • Thermofan
  • VCT Switched ( N-VCT)
  • Check Engine Light
  • Fuel Pump Control Module
  • MAF Sensors
  • Narrowband Sensors
  • Vehicle Speed
  • Air temperature Sensor (GTR Only)

Platinum PRO Plug-in ECU Nissan R34 GT-T Skyline
Part Number: HT-055105

SUITS: Nissan R34 GT-T Skyline. Manual transmission only.

INCLUDES: Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.NOTES: Directly accepts an input from a flex fuel sensor.

OVERVIEW

  • Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
  • Uses the cars factory sensors
  • Supports Sequential Injection (peak and hold) and Direct fire ignition
  • Windows 2000, XP, Vista, Windows 7 compatible software
  • Real time programming, instant hesitation free adjustment while engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
  • OBD II Code Storing & Malfunction Indicator Light (MIL) Control (through laptop only )
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband “auto tuning” using user definable target AFR table
  • Flex Fuel Support
  • USB and CAN Communication Port
FEATURES
SUPPORTED OEM FUNCTIONALITY:
  • Boost Control
  • A/C Output
  • Idle Control
  • Thermofan
  • VCT Switched ( N-VCT)
  • Check Engine Light
  • Fuel Pump Control Module
  • MAF Sensors
  • Narrowband Sensors
  • Vehicle Speed
  • Air temperature Sensor
Platinum PRO Plug-in ECU Nissan R34 GTR Skyline
Part Number: HT-055106
SUITS: Nissan R34 GTR Skyline.
INCLUDES: Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.
NOTES: Directly accepts an input from a flex fuel sensor.
OVERVIEW
  • Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
  • Uses the cars factory sensors
  • Supports Sequential Injection (peak and hold) and Direct fire ignition
  • Windows 2000, XP, Vista, Windows 7 compatible software
  • Real time programming, instant hesitation free adjustment while engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
  • OBD II Code Storing & Malfunction Indicator Light (MIL) Control (through laptop only )
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband “auto tuning” using user definable target AFR table
  • Flex Fuel Support
  • USB and CAN Communication Port

 

FEATURES
SUPPORTED OEM FUNCTIONALITY:
  • Boost Control
  • A/C Output
  • Idle Control
  • Thermofan
  • VCT Switched (N-VCT)
  • Check Engine Light
  • Fuel Pump Control Module
  • MAF Sensors
  • Narrowband Sensors
  • Vehicle Speed
  • Air temperature Sensor
Platinum PRO Plug-in ECU Nissan Z32 Fairlady 300ZX
Part Number: HT-055107
SUITS: Nissan Z32 Fairlady 300ZX. Manual transmission only.
INCLUDES: Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.
NOTES: Directly accepts an input from a flex fuel sensor.
OVERVIEW
  • Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
  • Uses the cars factory sensors
  • Supports R32 GT-R twin MAF sensors
  • Supports Sequential Injection (peak and hold) and Direct fire ignition
  • Windows 2000, XP, Vista, Windows 7 compatible software
  • Real time programming, instant hesitation free adjustment while engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
  • OBD II Code Storing & Malfunction Indicator Light (MIL) Control (through laptop only )
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband “auto tuning” using user definable target AFR table
  • Flex Fuel Support
  • USB and CAN Communication Port
FEATURES
SUPPORTED OEM FUNCTIONALITY:
  • Boost Control
  • A/C Output
  • Idle Control
  • Thermofan 1&2
  • Check Engine Light
  • Fuel Pump Control Module
  • MAF Sensor
  • Narrowband Sensors
  • Vehicle Speed
  • Fuel temperature Sensor
Platinum PRO Plug-in ECU Nissan 200SX/Silvia S15
Part Number: HT-055112
SUITS: Nissan 200SX/Silvia S15 (Aust and JDM), 200SX/Silvia S14A S2 "KOUKI", 180SX S13 Rev 3 "Type X" 1996 onwards. Manual transmission only.
INCLUDES: Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.
NOTES: Directly accepts an input from a flex fuel sensor.
OVERVIEW
  • Direct plug and play replacement of the OEM ECU, no rewiring necessary
  • Uses the car's factory sensors
  • Windows 2000, XP, Vista, Windows 7 & 10 compatible software
  • Real-time programming, instant hesitation free adjustment while the engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband “auto-tuning” using user definable target AFR table
  • Direct Flex Fuel compatible
FEATURES
SUPPORTED OEM FUNCTIONALITY:
  • Boost Control
  • A/C Output
  • Idle Control
  • Thermofan
  • Check Engine Light
  • Fuel Pump Control Module
  • MAF Sensors
  • Narrowband Sensors
  • Vehicle Speed
  • Air temperature Sensor
Platinum PRO Plug-in ECU Nissan Y61 Patrol (TB48)
Part Number: HT-055014
SUITS: Nissan Y61 Patrol (TB48). Manual transmission only.
INCLUDES: Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.
NOTES: Requires a CAN IO 12 Expander Box to accept an input from a flex fuel sensor.
OVERVIEW
  • Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
  • Uses the cars factory sensors
  • Supports Sequential Injection (peak and hold) and Direct fire ignition
  • Windows 2000, XP, Vista, Windows 7 compatible software
  • Real time programming, instant hesitation free adjustment while engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
  • OBD II Code Storing & Malfunction Indicator Light (MIL) Control (through laptop only )
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband “auto tuning” using user definable target AFR table
  • Flex Fuel Support
  • USB and CAN Communication Port
FEATURES
SUPPORTED OEM FUNCTIONALITY:
  • Boost Control
  • A/C Output
  • Idle Control
  • Thermofan
  • Check Engine Light
  • Fuel Pump Control Module
  • MAF Sensors
  • Narrowband Sensors
  • Vehicle Speed
  • Air temperature Sensor
Platinum PRO Plug-in ECU Nissan Z33 350Z DBW
Part Number: HT-055016
SUITS: Nissan Z33 350Z. Manual transmission only.
INCLUDES: Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.
NOTES: Does not suit HR dual throttle models. Directly accepts an input from a flex fuel sensor.
 
OVERVIEW
  • Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
  • Uses the car's factory sensors
  • Supports Sequential Injection (peak and hold) and Direct fire ignition
  • Windows 2000, XP, Vista, Windows 7 compatible software
  • Real time programming, instant hesitation free adjustment while engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
  • OBD II Code Storing & Malfunction Indicator Light (MIL) Control (through laptop only )
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband “auto tuning” using user definable target AFR table
  • Flex Fuel Support
  • USB and CAN Communication Port
FEATURES
SUPPORTED OEM FUNCTIONALITY:
  • Boost Control
  • A/C Output
  • Idle Control
  • Thermofan
  • Check Engine Light
  • Fuel Pump Control Module
  • MAF Sensors
  • Narrowband Sensors
  • Vehicle Speed
  • Air temperature Sensor
Platinum PRO Plug-in ECU Mitsubishi EVO 9 MIVEC
Part Number: HT-055064
SUITS: Mitsubishi EVO 9 MIVEC and JDM EVO 8 MR (6-spd)
INCLUDES: Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.
NOTES: Requires a CAN I/O 12 Expander Box to accept an input from a flex fuel sensor.
FEATURES
  • Direct plug and play replacement of the OEM ECU, no rewiring necessary
  • Uses the car's factory sensors
  • Windows 2000, XP, Vista, Windows 7 & 10 compatible software
  • Real-time programming, instant hesitation free adjustment while the engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband “auto-tuning” using user definable target AFR table
Platinum PRO Plug-in ECU Honda EP3
Part Number: HT-055047
SUITS: Honda EP3 and DC5 (03-04). Manual transmission only.
INCLUDES: Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.
NOTES: Requires a CAN I/O 12 Expander Box to accept an input from a flex fuel sensor.
OVERVIEW
  • Direct plug and play replacement of the OEM ECU, no rewiring necessary
  • Uses the car's factory sensors
  • Windows 2000, XP, Vista, Windows 7 & 10 compatible software
  • Real-time programming, instant hesitation free adjustment while the engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband “auto-tuning” using user definable target AFR table
Platinum PRO Plug-in ECUHonda DC5/RSX
Part Number: HT-055048
SUITS: Honda DC5, Acura RSX (2005-06.) Non DBW, Manual transmission only.
INCLUDES: Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.
NOTES: Requires a CAN I/O 12 Expander Box to accept an input from a flex fuel sensor.
OVERVIEW
  • Direct plug and play replacement of the OEM ECU, no rewiring necessary
  • Uses the car's factory sensors
  • Windows 2000, XP, Vista, Windows 7 & 10 compatible software
  • Real-time programming, instant hesitation free adjustment while the engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband “auto-tuning” using user definable target AFR table
Platinum PRO Plug-in ECU Honda S2000
Part Number: HT-055050
SUITS: Honda S2000 AP1 (00-04) and AP2 (05). Non DBW, manual transmission only.
INCLUDES: Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.
NOTES: Non DBW, manual transmission only. Requires a CAN I/O12 Expander Box to accept an input from a flex fuel sensor.
  • Direct plug and play replacement of the OEM ECU, no rewiring necessary
  • Uses the car's factory sensors
  • Windows 2000, XP, Vista, Windows 7 & 10 compatible software
  • Real-time programming, instant hesitation free adjustment while the engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband “auto-tuning” using user definable target AFR table
Platinum PRO Plug-in ECU Hyundai BK Theta Genesis
Part Number: HT-055045
SUITS: Hyundai Genesis BK Theta (2009-12) 2.0 Turbo. Manual transmission only. (Also suits 2013-15 models but does not support factory CAN AC request or electronic wastegate control. Please see the product quick start guide for further information.
INCLUDES: Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.
NOTES: Directly accepts an input from a flex fuel sensor.
OVERVIEW
  • Direct plug and play replacement of the OEM ECU, no rewiring necessary
  • Uses the car's factory sensors
  • Windows 2000, XP, Vista, Windows 7 & 10 compatible software
  • Real-time programming, instant hesitation free adjustment while the engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband “auto-tuning” using user definable target AFR table
Platinum PRO Plug-in ECU Subaru GDB WRX MY01-05
Part Number: HT-055174
SUITS: Subaru WRX (GDB MY01-05), STI (MY01-05 JDM & Aust Only) EJ20 Non DBW. Manual transmission only.
INCLUDES: Platinum PRO Direct Plug-in ECU, Plug and pins for auxiliary I/O harness. Haltech CAN adaptor cable DTM-4 female receptacle/socket to 8 pin black Tyco 3"/75mm (used to adapt a Platinum series ECU to a DTM-4 Elite CAN system), USB programming cable and USB Software Key.
NOTES: Directly accepts an input from a flex fuel sensor.
OVERVIEW
  • Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
  • Uses the car's factory sensors
  • Supports Sequential Injection (peak and hold) and Direct fire ignition
  • Windows 2000, XP, Vista, Windows 7 compatible software
  • Real time programming, instant hesitation free adjustment while engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
  • OBD II Code Storing & Malfunction Indicator Light (MIL) Control (through laptop only )
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband “auto tuning” using user definable target AFR table
  • Flex Fuel Support
  • USB and CAN Communication Port